Chinese translation for "arc blow"

电弧磁偏吹
电弧偏吹
弧变形
弧吹
弧偏吹

Related Translations:

arc out:  沿弧线后拉

behind arc:  弧后

stationary arc:  稳定弧光

conjunct arc:  联合弧

scotia arc:  斯科舍岛弧

diffraction arcs:  衍射线

double arcing:  双弧现象

goniometer arc:  测角器分度圈

arc cathode:  电弧阴极电弧阴级弧光放电阴极

arc brazing:  电弧钎焊电弧铜焊电弧硬焊弧铜焊

Example Sentences:

	1.	The electrode angle should be adjusted to a position that tends to overcome arc blow 焊丝的角度应调整至克服磁偏吹的方向
	2.	Transitional feature of the arc and metal droplet in the welding process with steam shielded arc is investigated by means of analysing the waveforms of welding voltage and current under different welding regimes and it is found that there are two types of arc process behavor ? " arc starting - arc blowing out - short - circuiting " and " arc - starting - short - circuiting " . under the condition of constant diameter of welding wire and its feeding speed , the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply . if arc process behaves as alternative process of " arc starting - arc blowing out - short - circuiting " with minimum time duration of arc blowing out and maximum frequency of short - circuit transition , the welding process will be stable with less spatter and smooth weld bead 通过分析不同焊接规范下的焊接电压和电流的波形.研究了水蒸气保护下电弧及熔滴过渡的特点，发现其电弧过程行为有“燃弧?熄弧?短路”和“燃弧?短路”两种形式.在焊丝直径和送丝速度一定的情况下，通过调节焊接回路中的电感量和电源电压，可以改变电弧的过程行为形式.若电弧过程呈“燃弧?熄弧?短路”交替进行，并且熄弧时间最短时，短路过渡频率最高，在这种情况下，飞溅小，焊道成型好，焊接过程稳定

Similar Words：

"arc bar" Chinese translation, "arc barrier" Chinese translation, "arc basement" Chinese translation, "arc bearing plate" Chinese translation, "arc bias" Chinese translation, "arc blow compensator" Chinese translation, "arc blow out" Chinese translation, "arc blowout" Chinese translation, "arc booster" Chinese translation, "arc boutant" Chinese translation